Vetter MPS 2.0 MWF, Operating Instructions Manual

Page: 16 / 200

– 5
 Check the receptacle and the fuse of
the power supply.

Check the power cable and the power
plug of the device.
 Press the switch on button of the pro-
tection switch.
 Turn on the appliance.
 Check the swimmer.
 Switch on the disposal pump.
 Remove obstructions from the suction
nozzle, suction tube, suction hose, or
coarse dirt filter/flat-fold filter.
 Replace the paper filter bag (optional).
 Ensure the filter cover properly locks
into place.
 Replace the flat pleated filter.

Check for proper installation of the flat
pleated filter.
 Check the proper installation of the
coarse dirt filter.
 Install the flat fold filter.
 Check for proper installation of the flat
pleated filter.
 Replace the flat pleated filter.
 Check the socket of the appliance.
 Free the stuck floater switch in the con-
tainer.
 Release the stuck pump impeller in the
pump.
 Route the disposal hose without kinks.
 Check the disposal hose for obstruc-
tions.
–
For this purpose, download our general
terms and conditions from our website:
www.vetter.de
–
In the event of a warranty claim, please
contact your distributor or the Vetter
GmbH, 53909 Zülpich presenting your
proof of purchase.
–
Only use accessories and spare parts
which have been approved by the man-
ufacturer. The exclusive use of original
accessories and original spare parts
ensures that the appliance can be oper-
ated safely and trouble free.
–
At the end of the operating instructions
you will find a selected list of spare parts
that are often required.
–
For questions concerning spare parts,
please contact:
Vetter GmbH
Blatzheimer Str. 10 - 12
53909 Zülpich
Tel. Germany: +49 (0) 2252/300850
Tel. international: +49 (0) 2252/300860
Suction turbine does not run
Suction turbine turns off
Suction capacity decreases
Dust escapes during dry vacuuming
Disposal pump is not running
Disposal pump does not produce
much volume
Warranty
Accessories and Spare Parts
16 EN