manualshive.com logo in svg

Vetter DuoLoc, Operation Manual

The Vetter DuoLoc Operation Manual is a comprehensive guide that enables you to maximize the potential of your Vetter DuoLoc product. Easily accessible and available for free download from our website, this manual provides step-by-step instructions and valuable insights to enhance your product experience.

Share
Download
background image

5.1.4 

KGA and KGI transport position

The “transport position” is the condition in which the folding fork arms are folded in for

operation without a transport task.

Switch to the transport position:

Fig. 21: Pulling out the locking bracket

1.

Pull the locking bracket out of the folding 

fork arms

 up to the stop (Fig. 21).

Fig. 22: Setting the transport position

 Operation

Operating and transport position > KGA and KGI transport position

V1.07/2021

Folding fork armsTypes KGA, KGI, and DuoLoc

35

Summary of Contents for DuoLoc

























































Reviews:

No comments

Related manuals for DuoLoc

HANGCHA CPCD30/35-XW43E-RT Operational And Maintenance Manual preview
CPCD30/35-XW43E-RT
Brand: HANGCHA Pages: 103

Brands by name

Popular brands

Load more brands