SETTING THE CLOCK
STEP 1
In any display mode, press the the “MODE” button for one second to display the
clock screen.
STEP 2
While the clock display is visible, press the “MODE” and “SET” buttons
simultaneously to reset the clock and the last digit will start blinking. Press the
“MODE” button until you reach the desired number.
STEP 3
Press the “SET” button to confirm your selection. Continue this procedure until
the proper time is completely set.
To reset the wheel circumference number, press the “SET” and “MODE” buttons simultaneously for three
seconds to display current wheel size number. Again press the “SET” and “MODE” buttons simultaneously
for three seconds and the original number will blink. Repeat the steps above to change the wheel
size setting.
