background image

Screen is dark and display characters look "strange".

Computer screens do not like to be left in direct sunlight for extended periods of time. Move the 
computer into the shade until the screen recovers. No effect on data.

Screen reading is weak or fading.

Symptom of a weak battery. Replace the battery.

Screen readings are erratic and read too high or too low.

Symptom of a weak battery. Replace the battery.

Screen "frozen", no response to buttons.

Symptom of a weak battery. Replace the battery.

No display whatsoever.

Battery is completely dead, or not installed. Replace or install the battery.

Acumen Inc, warrants all Vetta products, to the original purchaser, to be free of defects in materials or 
workmanship for a period of three years from the original date of purchase. Acumen Inc will, at its sole 
discretion, repair or replace any product deemed defective. This express warranty is in lieu of all other 
warranties, either expressed or implied. Any warranties of merchantability or fitness for a particular 
purpose are limited to the three years duration of the above express warranty. Acumen Inc will not be 
held liable for any incidental or consequential damages.

If you ever experience a problem with the function of your Vetta RT cycle computer, please contact or 
visit your local Authorized Acumen Inc Dealer for assistance.
Should you experience a problem with your Vetta RT cycle computer that cannot be solved by your 
local Acumen Inc Dealer, please follow these simple steps to assure quick and efficient processing of 
your claim.

WARRANTY RETURN & REPAIR POLICY

Step 1:

Step 2:

Contact the appropriate Acumen Inc Customer Service Center listed below for help and to 
obtain a Return Authorization Number (RA Number).
Send the unit back to the appropriate Acumen Inc Customer Service Center, together with 
the original copy of your purchase receipt and a detailed explanation of the problem that 
you are experiencing. Please be sure to write the Return Authorization Number (RA 
Number) on your return package.

ACUMEN INC CUSTOMER SERVICE CENTERS

Acumen Inc.

101A Executive Dr., Suite 100,
Sterling, VA 20166, USA.

Acumen Europe BV

Splijtbakweg 117, 1333 HJ, Almere, 
The Netherlands.

Email: [email protected]
Website: www.vetta.com

Summary of Contents for RT33










Reviews: