6
7
8
31
07/2020
VETRON 5400 - CYLINDER ARM MACHINE - INSTRUCTION BOOK
04. MAINTENANCE
05.
PNEUMATIC SYSTEM
CAUTION! RISK OF INJURY!
Push the X-button at the machine head, the red light illuminates showing the active
“BLOCKED MODE“
, or turn the machine off before checking the pneumatic system.
Failure to comply produces a risk of injury in case of an unintentional machine
operation.
CHECKING THE MAINTENANCE UNIT:
Check water in pressure regulator:
»
The water level should not rise to the level of the filter cartridge
6
.
After unscrewing the drain screw
8
, the water will flow under pressure out of the water sepe-
rator
7
.
Clean filter cartridge:
»
Dirt and condensation are seperated through the filter cartridge
6
.
»
Disconnect the machine from the compressed air supply.
»
Loosen the drain screw
8
.
There should not be any pressure in the machine pneumatic system.
»
Unscrew the water seperator
7
.
»
Unscrew the filter cartridge
6
.
Wash the filter shell and cartridge with cleaning fluid (no solvent) and blast clean.
»
Re-assemble the maintenance unit.
Check for system leaks.
Summary of Contents for 5400
