Short press to Menu. Enter System Settings.
Press and to reach the item . Short
press to make the selection box green. Then
press and to select the unit you need. The
default unit is 0.000m. There are 8 different units
for options.
Reference point setting
The device get 4 different reference points. System default reference point is bottom.
Press to select the reference point.
Middle(Screw Hole)
Top
Bottom
Tail-Board
Long press to start the device.
Long press to turn off the device. The device can also turn off automatically in 150s
without any operation. (150s is default value, user can set the time in the System Settings.)
Unit Setting
Battery
Basic Settings
Power On/Off
Battery Installation
Battery Charging
Discharge the battery door, and place battery according to correct
polarity, then cover the battery door.
1.2V 2400mAh AA Ni-mh battery is recommended. A USB cable is
included in the accessories bag.
Please remove the batteries when the device is off work in order to
protect the device from corrosion.
The device is accompany with rechargeable batteries.
Please recheck if the batteries in the battery cabinet is rechargeable
batteries before you connect it to the power supply for charging. If
the batteries are not rechargeable, the device will not start charging.
The symbol will show in greening while charging. Heating is
normal while charging. Symbol means charging completed.
