DESCRIPTION OF THE SYMBOLS
Read instructions carefully before any use
Complies with relevant European regulations
The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from
household waste. The item should be handed in for recycling in accordance with local environmental
regulations for waste disposal.
On battery
Do not expose the battery to water.
Do not expose the battery to fire or incinerate.
Do not expose the battery to high temperatures (above 45°C)
On charger
Class II machine – Double insulation – Grounded outlet not required.
Use this device indoors only.
Fuse
\
SPECIAL SAFETY INSTRUCTIONS FOR CORDLESS DRILLS
1. Hold power tool by insulated gripping surfaces, when performing an operation where the cutting
accessory may contact hidden wiring. Cutting accessory contacting a “live” wire may make exposed
metal parts of the power tool “live” and could give the operator an electric shock.
2. Support the work properly. If possible, always use clamps or a vice to hold your work.
3. Do not put excessive pressure on the tool, causing the motor to bog down. Allow the bit to screw
without pressure.
4. Only use accessory bits in good condition.
5. Before starting, check that there is sufficient clearance for the bit under the work-piece.
6. Do not touch the bit after operation. It will be very hot. Keep your hands away from under the
work-piece. Never use your hands to remove dust, chips or waste close by the bit.
7. Periodically check that all nuts, bolts and other fixings are properly tightened.
8. When using the tool, use safety equipment including safety glasses or shield, hearing protection,
and protective clothing including safety gloves. Wear a dust mask if the operation creates dust.
