1
Document Ref:pm65\manuals\INT2_P Revision:20 Dated: 28 February 2011
Software version F00.21
The New version of the INTUITIVE Family, with these extra benefits...
* 20 bit A/D convertor, higher precision, improved stability.
* 16 bit D/A convertor, greater resolution.
* Direct and theoretical linearisation features
* More comms options, for faster, more flexible data access.
* Extra ‘Factor and Offset’ feature, allows you to correct for Gravity, Container Tare etc.
* Timers on alarm relays.
* More alarm setting modes, including in-band and out of band alarms, pump control.
* Summary Screen, lets you know which options are fitted, whenever you want to know.
* Wider operating temperature range
* Variable brightness feature, plus Daylight viewing option for use in direct sunlight
* Adjustable menu timeout delay, to suit new and experienced users.
* Choice of Basic or Advanced menu in standard model
* Outputs selectable from nett or gross.
* Real -Time clock option
* DIN Rail mounting option
P1001/6
= Meter family
P
= Process model
Analogue output:
0
=none,
ANB
=-10to+10V,
ANI
=4-20mA,
ANV
=0-10V
Alarm outputs:
0
=none,
AL2
= 2 relays,
AL4
=4 relays
Serial data:
0
= none,
232
=RS232,
485
=RS485
Display colour:
R
=Red,
G
=Green
Power:
AC
=100-240V AC,
DC
=11-30V DC
Mounting:
0
= Standard panel
DIN
= DIN rail mounting
!
Caution:
There is a risk of electrical
shock if this instrument is not properly installed
Caution:
Risk of danger: Read the whole
manual before you install this meter
Panel mounting process indicator / controller
P1001/6-P
Connection details, scaling and general information
VETEC ApS, Lucernemarken 18
DK-5260 Odense, Denmark
http://www.vetec.dk
Tel: +45 65919802
Fax: +45 65918802
Ordering code:
P1001/6-P-X-X-X-X-X-X
