Vestil STRAP-P2 Manual Download Page 2

TABLE OF CONTENTS

 

Rev. 7/29/2021 

  STRAP-FP  MANUAL 

                             

TABLE OF CONTENTS

 

Copyright 2021 Vestil Manufacturing Corp                          Page 2 of 8 

 

 

SIGNAL WORDS  

  This manual uses SIGNAL WORDS to indicate the likelihood of personal injuries, as well as the probable 

seriousness of those injuries, if the product is misused in the ways described. Other signal words call 

attention to uses of the product likely cause property damage. The following are signal words used in 

this manual and their definitions.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SAFETY INSTRUCTIONS 

  Vestil strives to identify all hazards associated with the use of our products. However, material handling 

is dangerous and no manual can address every risk. The most effective way to avoid injury is for the end-

user to exercise sound judgment whenever using this product.

 

 

 

       

WARNING 

Risks of serious personal injuries or death.

 

 

Read and understand the entire manual before assembling, installing, using or servicing the product

.

 

Read the manual to refresh your understanding of proper use and maintenance procedures whenever 

necessary. Properly maintain the device following to the 

INSPECTIONS & MAINTENANCE

 instructions on 

p. 6

. 

 

DO NOT remove, alter, or obscure any label.  If a label is missing, damaged, or unreadable, contact 

the 

TECHNICAL SERVICE AND PARTS DEPARTMENT

 to order a replacement. DO NOT use the cart until all 

replacement labels are applied. DO NOT remove or obscure any label. 

 

DO  NOT  sit  on  the  spool  holding  mechanism,  i.e.  retaining  discs.  Only  use  the  cart  to  move  spools 

of strapping material. 

 

DO NOT traverse sloped terrain with the cart unless you can easily handle the cart. ALWAYS remain 

uphill of the cart whenever moving up or down inclines.  

 

Store the cart in a dry location that is protected from weather whenever the cart is not in use. 

 

DO NOT exceed the capacity/maximum rated load. See Label 1153 on product; also see 

LABELING 

DIAGRAM

 on p. 7. 

 

DO NOT ride, or allow others to ride, on the cart. 

 

DO inspect the product according to the instructions in 

INSPECTIONS & MAINTENANCE

  on p. 6. DO 

NOT use the product unless it is in 

SATISFACTORY CONDITION

See 

RECORD

 on p. 6. 

 

DO NOT modify  the  product  without  written approval from Vestil. 

Unapproved modifications 

automatically void the 

LIMITED WARRANTY

 (p. 8) and might make the product unsafe to use

 

 

 

     DANGER

 

Identifies a hazardous situation which, if not avoided, WILL  result in DEATH or 

SERIOUS INJURY.  Use of this signal word is limited to the most extreme situations

.

 

 

 

WARNING

 

Identifies a hazardous situation which, if not avoided, COULD result in DEATH or 

SERIOUS INJURY.

 

 

 

CAUTION

 

Indicates a hazardous situation which, if not avoided, COULD result in MINOR or 

MODERATE injury.

 

 

 

NOTICE

 

Identifies practices likely to result in product/property damage, such as 

operation that might damage the product

.

 

 

Summary of Contents for STRAP-P2









Reviews: