Rev.
12/20/2016
SST-45,
MANUAL.doc
Copyright 2015 Vestil Manufacturing Co.
Page 1 of 8
SST-45 Self-Leveling Scissor Table
Assembly, Use, and Maintenance Manual
Receiving instructions:
After delivery, IMMEDIATELY remove the packaging from the product. Inspect the product closely for damage.
If damage
is discovered, immediately record a complete description of the damage on the bill of lading
. If the product is
undamaged, discard the packaging.
NOTES:
1) Compliance with laws, regulations, codes, and non-voluntary standards applied where the product is used is the
exclusive responsibility of the end-user.
2) VESTIL is
not liable
for any injury or property damage that occurs from failure to apply either:
a) Instructions in this manual; or b) information provided on labels affixed to the product. Vestil is not responsible for
consequential damages while assembling, installing, using or maintaining this product.
Table of Contents
Product Specifications……………….…………………..…………………………………………………………………………2
Spring Combinations (Diagrams & Load Table)…………………………………………………………………………………2
Signal Words….……………………..……………………………………………………………………………………………... 3
Safe Use Recommendations……………………………………………………………..………………………………………. 3
Assembly Instructions………………………………………………………………………………………………………………4-5
Installing/Removing Springs………………………………………………………………………………………………………. 5
Table Loading Instructions…………………………………………………………………………………………………………6
Inspections & Maintenance……………………………………………………………………………………………………….. 6
Troubleshooting Guide…………………………………………………………………………………………………………….. 6
Labeling Diagram……...……………………………………………………………………………………………………..……. 7
Limited Warranty…...………………………………………………………………………………………………………………. 8
V
ESTIL
M
ANUFACTURING
C
ORP
.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Fax: (260) 665-1339
www.vestilmfg.com
e-mail:
