Rev. 10/23/2017
SPS2, MANUAL
Copyright 2017 Vestil Manufacturing Co. Page 4 of 5
1.) Frame and shelves – Look for damage and deformation, severe corrosion, etc. Check all welds
for cracks. Push the unloaded cart and listen for unusual noises and movement. Clean the
shelves and steps. Absorb water and other liquids.
2.) Step assembly – Confirm that the steps and springs operate normally. Both rubber feet should
firmly contact the ground and the steps should slide up-and-down easily when weight is applied
to them.
3.) Hardware – check all caster hardware/fasteners and spring pins. Tighten all loose fasteners.
4.) Labels – confirm that each label is in place and in good condition (see “Labeling Diagram”
below).
Labeling Diagram
Your cart should always be labeled as shown in the diagram. Replace any label that is missing,
damaged or not easily readable, e.g. faded.
A:
Label 446
A
B
B:
Label 608
Specifications
MODEL A B C D E F
TOTAL
CAPACITY WEIGHT
SPS2-2236 27
5
/
8
” 17
3
/
4
” 35
5
/
8
” 39
3
/
4
” 21
5
/
8
” 21
7
/
8
”
1000 lb. 455kg
117 lb. 53kg
SPS2-2840 31
5
/
8
” 23
3
/
4
” 39
5
/
8
” 43
3
/
4
” 27
5
/
8
” 27
7
/
8
”
1000 lb. 455kg
137 lb. 62kg
SPS2-2848 39
5
/
8
” 23
3
/
4
” 47
5
/
8
” 51
3
/
4
” 27
5
/
8
” 27
7
/
8
”
1000 lb. 455kg
149 lb. 68kg
Capacity per shelf:
550 lb. (250kg)
Step assembly capacity:
350 lb. (159kg)
Step
assembly
