6/30/2016
SE-HP, Manual
Copyright 2016 Vestil Manufacturing Corp. Page 1 of 11
SE/HP
S
ERIES
C
OMBINED
H
AND
P
UMP
&
E
LECTRICAL
S
TACKER
I
NSTRUCTION
M
ANUAL
SE/HP-63, SE/HP-98 and
SE/HP-118
SE/HP-63-AA, SE/HP-98-AA and
SE/HP-118-AA
Receiving instructions:
After delivery, IMMEDIATELY remove the packaging from the product in a manner that preserves the packaging and
maintains the orientation of the product in the packaging; then inspect the product closely to determine whether it
sustained damage during transport.
If damage is discovered during the inspection, immediately record a
complete description of the damage on the bill of lading
. If the product is undamaged, discard the packaging.
Notes:
1) Compliance with laws, regulations, codes, and non-voluntary standards enforced in the location where the product
is
used
is exclusively the responsibility of the owner/end-user.
2) VESTIL is
not liable
for any injury or property damage that occurs as a consequence of failing to apply either: a)
the instructions in this manual; or b) information provided on labels affixed to the product. Neither is Vestil
responsible for
any
consequential damages sustained as a result of failing to exercise sound judgment while
assembling, installing, using or maintaining this product.
Table of Contents
Hazard identification: explanation of signal words…………………………………………………...…………………….
2
Safety
Guidelines………………………………………………………………………………………………………..........
2
Introduction……………………………………………………………………………………………...……….………….....
3
Operation…….…………………………………………………………………………………………………………...…..
3
Specifications
……………………………………………………………………………………………...…………………..
5
Inspections & Maintenance……………………………………………………………………………………………...….
6
Trouble Shooting…………………………………………………………………………………………………...………….
9
Limited warranty…………………………………………………………………………………………………...…………..
11
V
ESTIL
M
ANUFACTURING
C
ORP
.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Fax: (260) 665-1339
www.vestilmfg.com
