Rev. 11/4/2016
NPCT, MANUAL
Copyright 2016 Vestil Manufacturing Corp. Page 2 of 6
Hazard identification with signal words
This manual uses SIGNAL WORDS to identify dangers that might arise during use. Signal words also indicate the
probable seriousness of injuries that could result if the product is misused. Signal words used in this manual appear
below along with their definitions.
Identifies a hazardous situation which, if not avoided, WILL result in DEATH or
SERIOUS INJURY. Use of this signal word is limited to the most extreme
situations.
Identifies a hazardous situation which, if not avoided, COULD result in DEATH or
SERIOUS INJURY.
Indicates a hazardous situation which, if not avoided, COULD result in MINOR or
MODERATE injury.
Identifies practices likely to result in product/property damage, such as operation that
might damage the product.
Each person who assembles, uses, or maintains this product should read the entire manual
and fully
understand the directions in advance. If after reading the manual you do not understand an instruction, ask
your supervisor or employer for clarification, because failure to adhere to the directions in this manual
might result in serious personal injury.
Safe use recommendations:
Material handling is dangerous. The following list identifies many unsafe activities that could occur while using the
cart. However, the most effective means for preventing injury is for the end-user to exercise sound judgment at all
times.
Improper or careless use of this product might result in serious personal injuries or even death.
Failure to read and understand the entire manual before assembling, using or servicing the product
constitutes misuse
.
Read the manual to refresh your understanding of proper use and maintenance procedures as
necessary.
DO NOT apply a load that weighs more than the maximum rated load of your cart. The rated load (capacity) appears
on label 287 as shown in “Labeling diagram” on p. 5 and in the “Specifications” information on p. 3.
DO NOT allow people to ride on the cart or the load.
Stand clear of the deck while applying a load to it. The deck pivots from the front end. Pinch points are created as
the deck lowers under a load. NEVER reach into or put any part of your body or clothing under the deck.
DO NOT use the cart in corrosive environments. ONLY use the cart on compacted, improved surfaces capable of
supporting the combined weight of the cart plus its maximum rated load.
DO NOT perform maintenance on this cart UNLESS it is unloaded. If repairs are necessary, ONLY install
manufacturer-approved replacement parts.
ALWAYS center and evenly distribute loads on the deck. Secure loads to the deck if they are likely to roll or slide.
DO NOT use the cart unless it is in normal operating condition. Inspect the unit before each use according to the
inspection instructions on p. 5 to determine whether the unit is functioning normally.
Before leaving the cart unattended, make sure that it will not roll on its own. Only park the cart on even, level
surfaces.
DO NOT use the cart UNLESS all labels are in place and readable (see “Labeling diagram” on p. 5).
DO NOT modify this product in any way. Modifications automatically void the limited warranty (see p. 6) and might
make the cart unsafe to use.
Proper use and maintenance are essential for this product to function properly.
Always use this product in accordance with the instructions in this manual.
Periodically lubricate moving parts.
Keep the product clean & dry.
Only use approved replacement parts. To order replacement or spare parts for this equipment, contact the factory.
