Rev. 3/30/2021
MTC-PNU-55 MANUAL
Copyright 2021 Vestil Manufacturing Co.
Page 2 of 7
SPECIFICATIONS (22-007-021)
Specifications for MTC-series compactors are provided on Vestil’s website. To access the appropriate
specifications document, navigate to this webpage:
https://www.vestil.com/product.php?FID=1500
. Click
the “Specifications” tab. Scroll the page to the entry for the model you purchased, and click the button in
the PDF column that looks like a pencil inside a blue box. A PDF file will open. This file is the specifications
document. Print a copy of the document and keep it with your copy of this manual. The following is an
exemplar specifications document for model MTC-PNU-55.
SIGNAL
WORDS
This manual uses SIGNAL WORDS to direct the reader’s attention to important safety-related messages.
These messages describe uses of the product that could result in personal injury or property damage.
Each signal word corresponds to a specific hazard level.
Identifies a hazardous situation which, if not avoided, WILL result in DEATH or SERIOUS
INJURY. Use of this signal word is limited to the most extreme situations.
Identifies a hazardous situation which, if not avoided, COULD result in DEATH or
SERIOUS INJURY.
Indicates a hazardous situation which, if not avoided, COULD result in MINOR or
MODERATE injury.
Identifies practices likely to result in product/property damage, such as operation that
might damage the product.
SAFETY INSTRUCTIONS
Vestil strives to identify all hazards associated with the use of our products. However, material handling
is dangerous and no manual can address every risk. The most effective way to avoid injury is for the end-
user to exercise sound judgment whenever using this product.
WARNING
Improper or careless operation might result in serious personal injuries or death.
•
Read and understand the entire manual before installing, assembling, using, or servicing the product
.
•
Moving parts create pinch point and crushing hazards. Avoid contact with the cylinder and the platen
whenever the cylinder is extending or retracting. Keep clear of all moving parts during operation.
•
Do not operate the machine if the pneumatic roller arm valve does not function properly. The
cylinder/ram should not extend or retract unless the guard is down. Do not disable the pneumatic roller
arm valve.
(Continues on page 3)
!
