Rev. 4/10/2019
LM-HP MANUAL
Copyright 2019 Vestil Manufacturing Corp.
Page 2 of 4
Signal Words
This manual classifies personal injury risks and situations that might cause property damage with signal words.
Signal words indicate the seriousness of injuries that might result if a particular act does, or does not, occur.
Identifies a hazardous situation which, if not avoided, WILL result in DEATH or SERIOUS
INJURY. Use of this signal word is limited to the most extreme situations.
Identifies a hazardous situation which, if not avoided, COULD result in DEATH or
SERIOUS INJURY.
Indicates a hazardous situation which, if not avoided, COULD result in MINOR or
MODERATE injury.
Identifies practices likely to result in product/property damage, such as operation that might
damage the boom.
Hazards
We strive to identify all hazards associated with the use of our products. However, material handling is
dangerous and no manual can address every risk. The most effective way to avoid injury is for the end-user to
exercise sound judgment whenever using this product.
Material handling is dangerous. Improper or careless use of this device might result in serious
personal injuries.
•
Read and understand the entire manual before installing, using or servicing this fork attachment. Read the manual to
refresh your understanding of proper installation, use, and maintenance procedures whenever necessary.
•
DO NOT attempt to resolve problems with the attachment unless you are authorized to do so and are
certain
that it
will be safe to use afterwards. Contact
if you are uncertain whether the attachment should be used.
•
Always inspect the attachment before using it. DO NOT use it unless it is in
. If you notice damage
to any part of the attachment including the nylon safety strap, tag the unit “Out of Service”. DO NOT use the attachment
until it is restored to original condition.
•
Only
lift
with this device. DO NOT use the attachment to pull/drag.
•
DO NOT use this product to lift people.
•
Rigging must be properly attached to the load and hook before lifting the load. Be certain that the load is balanced to
avoid load swing.
•
DO NOT leave an elevated load unattended.
•
DO NOT use this attachment to lift (or move) a load that is unstable when elevated.
•
DO NOT attempt to lift a load that weighs more than the capacity of the attachment OR the lift truck,
whichever is
smaller
. The capacity of your attachment appears on tag 993. The tag is attached to the product as shown in the
•
DO NOT elevate any load more than a few inches above the ground except as necessary to avoid contact with
objects in the path of travel.
•
DO NOT raise a load over people or allow anyone to stand or reach beneath a suspended load.
•
DO NOT modify this product in any way. A “modification” is a change that alters the product from original condition,
like bending the hook plate or removing parts.
Unauthorized modifications automatically void the
(see p. 4) and might make the product unsafe to use
.
•
Store the LM-HP in a dry location.
Labeling Diagram
The unit should be labeled as shown in the diagram. However, label content and location are subject to
change so your product might not be labeled exactly as shown. Replace all labels that are damaged, missing, or
not easily readable (e.g. faded). Order replacement labels by contacting
http://www.vestilmfg.com/parts_info.htm
. Alternatively, you may request replacement parts and/or service by
calling (260) 665-7586 and asking the operator to connect you to the Parts Department.
Tag 993: Obverse side - Product
specifications
[Tag attaches to handle of unit via zip-tie]
Tag 993: Reverse side – Safety messages