Rev. 4/22/2019
FMDL MANUAL
Copyright 2019 Vestil Manufacturing Corp.
Page 1 of 16
FMDL-Series Single & Double Eagle Beak Fork-Mounted Drum Lifters
Use and Maintenance Manual
FMDL-1 (Eagle beak™) FMDL-2 (Eagle Beak™) FPDL-8-L (Base Engaging
Plastic Barrel Handler)
FPDL-11-H (Top Engaging Plastic DFDL-3 (Eagle Beak™, Top, & Base
Barrel Handler) Engaging Barrel Handler)
Receiving instructions:
After delivery, remove the packaging from the product. Inspect the product closely to determine whether
it sustained damage during transport. If damage is discovered, record a complete description of it on the
bill of lading. If the product is undamaged, discard the packaging.
NOTE:
The end-user is solely responsible for confirming that product design, use, and maintenance comply with
laws, regulations, codes, and mandatory standards applied where the product is used.
Technical Service and Replacement Parts:
For answers to questions not addressed in these instructions and to order replacement parts, labels,
and accessories, call our Technical Service and Parts Department at (260) 665-7586. The department can
also be contacted online at
http://www.vestilmfg.com/parts_info.htm
Table of Contents
Table of Diagrams
FMDL-1 parts diagram and bill of materials
…………………..…...........
FMDL-2 parts diagram and bill of materials
….…....…...........
…………………..……...............
FPDL-11-H parts diagram and bill of materials
FPDL-8-L parts diagram and bill of materials
DFDL-3 parts diagram and bill of materials
Vestil Manufacturing Corp.
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Fax: (260) 665-1339