Vestil CART-1000-S-HR, Instruction Manual

Page: 7 / 17

- 7 -
5-2 Lifting the table
WARNING
1. DO NOT overload lift table, stay within its rated capacity.
2. DO NOT side end load must be distributed on at least 80% of table area.
Press the lifting pedal several times until the table reaches the desired position.
The table does not elevate after reaching the highest position even if the lifting pedal
is pressed.
The table lowers slightly after reaching the highest position.
NOTE:
The hydraulic cylinder is designed to hold table. As is the nature of the hydraulic
system, table lowers very slowly over and extended period of time, Please note the
table does not stay at the same position on indefinitely.
5-3. Lowering table
WARNING
DO NOT put foot or hand in scissors mechanism.
Pull the lowering down and table lowers.