background image

SAFETY INSTRUCTIONS

We have included this section for your safety. Please read this information carefully before using 

your hob.

 WARNING:

· 

It is hazardous for anyone other than authorised service personal, to carry out servicing or repairs 

which involve the removal of covers. 

· 

To avoid the risk of an electric shock, do not attempt repairs yourself.

· 

In the event of any damage that occurs as a result of improper connection or installation, the 

warranty will not be valid.

Correct use:

· 

Make sure all the packaging has been removed before you use the hob.

· 

Keep all packaging until you are sure that the hob is working properly.

· 

The electrical safety of this hob is guaranteed only if it is connected to a properly earthed system, 

which complies with the electrical safety standards in force. If you   cannot verify that this 

fundamental safety requirement is in place, consult a qualified   electrician.

· 

Do not put pressure on the power supply cable while fitting the hob.

· 

Never replace the power supply cable yourself. Any maintenance must be carried out by a 

qualified electrician with the mains supply disconnected.

· 

Adaptors, multiple sockets and/or extension leads must not be used.

· 

Built-in appliances may only be used after they have built in to suitable units and work surfaces 

that meet the standards.

· 

This hob must only be used for the purpose of heating or cooking food, any other use, for example 

heating rooms, is dangerous. The manufacturer will not be liable   for damages resulting from 

improper, incorrect or negligent use.

· 

Do not cut bread on the glass of the hob. Glass worktop should not be used as working surfaces.

· 

If sharp edged dishes are scraped on the surface of the hob, it may cause damage to the surface.

· 

If you notice any cracks on your hob surface, disconnect it from the supply source to avoid the 

possibility of an electric shock..

· 

It is advisable to have a smoke detector fitted in your home, and have a fire blanket or extinguisher 

close to the hob.

2

Summary of Contents for WI 84 PS





































Reviews: