4
GB
Before operating your new appliance,
please read the following instructions care
-
fully as they contain important information
on safety, installation, operation and main
-
tenance. Keep the instructions for future
reference. On receipt, check to ensure that
the appliance has not been damaged dur
-
ing transport. Transport damage should be
reported to the local distributor before the
wine cooler is put into use.
Remove the packaging. Before connecting
the cooler to the power source, let it stand
upright for approximately 2 hours. This will
reduce the of a malfunction in the cooling
system due to handling during transporta
-
tion.
Clean the inside of the cabinet using
warm water with a mild detergent. Rinse
with clean water and dry thoroughly (see
cleaning instructions). Use a soft cloth. If
the appliance has been laid down during
transport, or if it has been stored in cold
surroundings (colder than +5°C), it must
stabilise in an upright position for at least 2
hour before being switched on.
Before use
Contents
Warning ......................................................
2
Before use ..................................................
4
Technical data .............................................5
Savings in energy consumption
in the use
....................................................5
Installation and start-up ..............................
6
Reversible door ..........................................
9
Operation and function .............................11
Defrosting, cleaning, and maintenance ....13
Fault finding ..............................................14
Warranty, spare parts and service ............15
Disposal
....................................................16