Vestfrost FW M Series, Instructions For Use Manual

Page: 10 / 164

10
GB
Starting up
Connect the appliance to the socket outlet.
Press the on/off switch .
The actual temperature in the freezer
section is shown on the display.
To display the actual temperature in the
refrigerator section, press the refrigerator
button once. After 1 minute, the display
returns automatically to the temperature
in the freezer section. Alternatively, press
the freezer button
once to return to the
temperature in the freezer section.
Temperature setting
The temperature in the refrigerator section
can be set from +2°C to +9°C by pressing
the refrigerator button
. The display
shows the temperature setting. Press the
button until the desired temperature setting
is displayed.
The temperature in the freezer section can
be set from -24°C to -16°C by pressing
the freezer button
. The display shows
the temperature setting. Press the button
until the desired temperature setting is
displayed.
Note that the temperature in the freezer
section should be -18°C or lower in order to
prevent microorganisms from multiplying.
A temperature setting of 4°C is
recommended for the refrigerator section.
Super Freeze
Before freezing large quantities of fresh
food, it is recommended that the Super
Freeze function be activated.
To do so, press the Super Freeze button
.
The control lamp lights yellow to indicate
that the Super Freeze function is switched
on.
Super Freeze is used to freeze large
quantities of fresh items and must be
activated about 12 hours before placing
such items in the freezer.
When Super Freeze is switched on, the
compressor runs constantly and the
temperature in the freezer falls below the
normal setting. This temperature reduction
ensures that non-frozen items do not affect
the temperature and thus the quality of
frozen items already stored in the freezer.
Super Freeze is switched off automatically
after 24 hours.
Door-open alarm (fridge)
If the door has been left open for longer
than two minutes, an acoustic alarm is
activated and the control lamp lashes red.
Both these alarms are reset when the door
is closed. On pressing the alarm button ,
only the acoustic alarm is switched off.
High-temperature alarm
Visual and acoustic alarms are activated if
the freezer temperature has been higher
than -10°C for more than 90 minutes. If
the temperature drops again, the visual
and acoustic alarms remain active and
the display continues to show the highest
temperature recorded in the freezer. To
reset the alarms, press the alarm button
.
This switches off the alarms and returns
the display to the actual temperature in the
freezer.