18
5. 1 CLEANING
Be sure that all control switches are off and your appliance cooled before cleaning
your oven. Plug off the appliance.
Control whether they are appropriate and recommended by the manufacturer before
using the cleaning materials on your oven. As they may damage the surfaces, do not
use caustic creams, abrasive cleaning powders, thick wire wool or hard tools. In case
the liquids that overflows around your oven burn, the enameled place may be
damaged. Immediately clean the overflew liquids.
Cleaning of Inside of Your Oven
Surely plug off the oven before starting cleaning.
The inside of enameled oven is cleaned in the best way when the oven is warm.
Wipe the oven with a soft cloth that had been hemmed in soapy water after each use.
Later wipe it with a wet cloth once more and then dry it. It may be required to use a
liquid cleaning material from time to time and make a complete cleaning. Do not clean
with dry and powder cleansers.
PART 5 : CLEANING AND MAINTENANCE OF YOUR OVEN
Cleaning Vitroceramic Cooker
Before starting cleaning wait for Vitroceramic cooker completely cool down. Be sure that
cleaning material does not contain any particles which may cause to scratch glass.Use cream
or liquid detergent. Vitroceramic surface must be cleaned with cold water and dried with soft
cloth in a way that no cleaning material may be left. Sweet type food must be cleaned right
after they are spilled before glass cools down. Steel cleaning material may damage Vitroceramic
glass. Dust on the surface must be cleaned with wet cloth. Color change on ceramic surfaces
does not effect functional structure and durability of Vitroceramic.
Color change is caused by not cleaning the residues, erosion due to casseroles and using
not appropriate cleaning materials and is not due to material change. If your oven has a
cleaning pallet, with this pallet you can clean even the smallest dirt on the surface. Materials
that are hard to clean like liquified plastic, oil and sweety materials can be cleaned with pallet
easily. The pallet is dangerous because it is equipped with razor therefore it must be kept away
from chidren. Be careful not to scratch silicon adhesive placed on the edges of the glass while
using pallet.
5.2 MAINTENENCE
Change of Oven Lamp
The change of oven lamp must be done by authorized technician. The rating the ampoule
should be 230V, 25Watt, Type E14 before changing the lamp,the oven should be plugged off
and it should be cool.
