Vestfrost CBI 2791 F NF E, User Manual

Page: 22 / 52

EN
22
INSTALLATION INSTRUCTIONS AND DOOR
REVERSIBILITY
19. Make sure that the
unit door
(15)
sticks onto the
door hang
(2)
. Pull the
unit
door
(15)
allowing the door hang
(2)
to slide out the door hang rails
(10)
. Observe
that the
door hang
(2)
stays stuck on the
unit door
(15)
. (fig.M)
20. Lay down the
unit door
(15)
on the floor and screw the
door hang
(2)
to the
unit
door
(15)
by screws
(7)
. (fig.M)
21. To overcome some of the furniture mistakes, there are
plastic spacers
(A)
sticked on the door hang
(2)
. Remove these plastic spacers
(A)
. (fig.N)
22. Remove the door hang rails
(10)
from the appliance door. Screw the adjustment
bolts
(12)
to the holes on the appliance door by leaving the necessary space
using unit door spacer
(11)
. (fig.O)
23. Open the appliance door. Place the
unit door
(15)
onto the appliance door
inserting adjustment bolts
(12)
into the slots on the door hang
(2)
. (fig.O)
24. Place the washers
(13)
and screw the nuts
(14)
onto the adjustment bolts
(12)
.
(fig.O)
25. 1~2 mm gap between the unit itself and unit door is vital for appliance
performance. Close the door and make the accurate adjustment of the
unit
door
(15)
by screwing or unscrewing the adjustment bolts
(12)
for vertical
adjustment and by the help of the slots on the
door hang
(2)
for other directions.
(fig.Q1)
26. Place the
door bottom fixings
(5)
to the bottom of the appliance door between
the appliance door and unit door
(15)
. Screw the door bottom fixings
(5)
to the
appliance door with
screws
(6)
. (fig.P)
27. Screw the
door bottom fixings
(5)
to the
unit door
(15)
by
screws
(7)
. (fig.P)
28. For the adjustment of the space between the unit upper door
(15)
and the
unit itself, you can unscrew the
screws
(6)
then adjust the space between the
appliance upper door
(19)
and unit upper door
(15)
by the spring effect of the
door bottom fixings
(5)
while screwing back the
screws
(6)
.
29. Slide the
hang cover
(3)
onto the
door hang
(2)
. (fig.Q2)