VESTEL DVD7200, Service Manual

Page: 15 / 25

15
10. C
ONNECTORS
10.1 SCART C
ONNECTORS
Pinout of the scart connector:
1
Audio Right Out
2 Audio Right In
3 Audio Left / Monu Out
4 Audio Gnd
5 Blue Gnd
6 Audio Left / Mono In
7 Blue
8 Control Voltage
9 Green Gnd
10 Comms Data 2
11 Green
12 Comms Data 1
13 Red Gnd
14 Comms Data Gnd
15 Red
16 Fast Blanking
17 Video Gnd
18 Fast Blanking Gnd
19 Composite Video In
20 Composite Video Out
21 Shield
Some cheaper SCART cables use unshielded wires, which is just about acceptable for
short cable lengths. For longer lengths, shielded co-ax cable become essential.
Scart Signals:
Audio signals
0.5V RMS, <1K output impedance, >10K input impedance.
Red, Green, Blue
0.7Vpp ± 2dB, 75R input and output impedance. Note that the Red connection (pin 20) can
alternatively carry the S-Video Chrominance signal, which is 0.3V.
Composite Video / CSync
1Vpp including sync, ± 2dB, 75R input and output impedance.Bandwidth = 25Hz to 4.8MHz for
normal TV Video de-emphasis to CCIR 405.1 (625-line TV)
Fast Blanking
75R input and output impedance. This control voltage allows devices to over-ride the composite
video input with RGB inputs, for example when inserting closed caption text. It is called fast
because this can be done at the same speeds as other video signals, which is why it requires the
same 75R impedances.