background image

4

1 Pre-Assembly Safety Rules

• Follow  the  instructions  in  this  manual.  Vestel 

cannot  be  held  liable  for  accidents,  damages  or 

fire that might occur as a result of failure to follow 

the instructions in this manual. User manual is an 

integral part of the appliance and must be kept.

• Cooker hoods are intended for domestic use only, 

and thus will not demonstrate full performance for 

other purposes of use. 

WARNING:

Use  of  your  appliance  beyond 

its  intended  purpose  might  cause  damages  or 

hazardous situations, and leads to void of warranty. 

Such damages are met by the customer only.

• Appliance must only be used over Electric and Gas 

cookers.

• Cooker hood must be mounted at a minimum of 

65  cm  distance  to  the  cooking  surface  of  electric 

cookers,  and  70  cm  to  the  cooking  surface  of 

multifunctional cookers. If the assembly instructions 

of gas cookers require a longer distance, it should be 

taken into consideration.

• Do  not  mount  this  appliance  on  the  wall  using 

plaster or silicon. Mount only on the surface.

• Since  maintenance  might  be  required  on  the  air 

outlet flue, do not secure the appliance on furniture 

or shelves that do not allow easy disassembly. 

• Flue  outlet  of  the  cooker  hood  shouldn't  be 

connected to flues which have warm gas connections 

such as water heater, stove, natural gas.  

• Risk of fire is higher with oil that is used frequently. 

Food that is cooked in the deep fryer and with oil 

must be cooked under supervision.

• Avoid flamy cooking since faults may occur in the 

appliance due to fire hazard and the high heat that 

will be generated.

• Aluminium  oil  filter  must  be  on  during  operation, 

and these filters must be cleaned at certain intervals. 

Otherwise,  oil  deposit  on  the  filter  might  lead  to 

deflagration.

• Assembly  and  electric  connection  must  be 

performed by authorized people.

• Call  the  nearest  Authorized  Service  in  case  of 

faults.

• Energy inlet cord shouldn't be subject to heating, 

jamming or crushing during assembly.

• While performing lamp replacement and cleaning 

processes  on  the  appliance,  the  cord  must  be 

disconnected or the fuse must be turned off.

• Problems that could prevent the aluminium flap at 

the flue outlet to be turned off when the motor is not 

operative must be eliminated.

• This  appliance  is  not  intended  to  be  used  by 

people with physical, sensory and mental disabilities 

(including children) or those who have not adequate 

experience  and  knowledge  regarding  its  use, 

unless they are under the supervision of a person 

responsible for the safety of the appliance.

 

• This  appliance  can  be  used  by  children  of  8 

years  and  older,  people  with  physical,  sensory  or 

mental  capability  deficiency  or  people  with  lack 

of  experience  or  knowledge;  as  long  as  they  are 

provided supervision or instructions for the safe use 

of the appliance and they comprehend the dangers.

 

• Operating voltage of your appliance is 220 - 240 

Volt ~ 50. Grounded plug has been mounted on the 

mains cable of your appliance. That cable must be 

connected to a grounded socket.

  

• In case of any deflagration, de-energize the cooker 

hood and cooking appliances, and cover

the flame. Never use water to extinguish the fire.

• While the electric cooker hood and other electric 

appliances operate simultaneously,

negative pressure in the room shouldn't exceed 4 Pa 

( 4 X 10 bar).

 

• Since the packing materials could be dangerous, 

keep them away from children.

Summary of Contents for ADB-6307
















Reviews: