VESTEL A Series, Service Manual

Page: 13 / 73

* 3lt in A1; 2,5lt in A2.
** 0,5lt in A1; 1lt in A2.
*** In service test the unsuccessful heating failure routine works with reduced time of
recognize (first measure at 2’20”, second measure t 4’20”)
If during the service test, the door is opened, Start/Stop led blinks (for models w/ display “SP” is
shown).
If during the service test, the Start/Stop button is pressed, the program corresponding
on the program leds(for models w/o display) or display(for models w/ display) position
starts.
To reset the service test, press On/Off button or plug out and then plug in.
Also at the end of the test, if an error does not occur, any error code is not visualized.
Machine will be standby position.
Note: If user did not set water hardness level before service test, “SE” is shown at the
beginning and end of service test.
SERVICE FAILURE CODES
For models w/o display;
Name S_P Wash Dry End display Notes
Overflow/Leakage - Blink - Blink F0/F1 In the normal work only leakage is
visualized.
Drain time out Blink - - Blink F2
Presence Flow
meter impulses
- - - Blink F3
Absence Flow
meter imp.
- Blink - - F4 In the normal work is not visualized.
Empty Level Blink - - - F5
Re-Fill time out Blink - - - F5
NTC ca/cc Blink Blink - - F6
Overheating Blink - Blink - F7
Unsuccessful
heating
- Blink Blink - F8
In the normal work is visualized at the end of
prg
Parameter set salt
incorrect
Blink Blink - Blink SE
In the normal work this failure is not
visualized.
CK Parameters Blink Blink Blink Blink FE
HIGH VOLTAGE Blink Blink Blink - HI
LOW VOLTAGE - Blink Blink Blink LO
13