English
- 47 -
RF Input
6.
connects to an aerial antenna system or a cable.
Note: that if you use a decoder or a media recorder, you should connect the aerial cable through the device
to the television with an appropriate antenna cable, as shown in the illustration in the following pages.
PC Input
7.
is for connecting a personal computer to the TV set.
Connect the PC cable between the
PC INPUT
on the TV and the PC output on your PC
HDMI Inputs
8.
are for connecting a device that has an
HDMI
socket. Your LED TV is capable of
displaying High De
fi
nition pictures from devices such as a High De
fi
nition Satellite Receiver or DVD
Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets
can accept either 720p or 1080p signals. No sound connection is needed for an HDMI to HDMI
connection.
Viewing the Connections - Side Connectors
CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that you subscribe
1.
to. For more information, see “Conditional Access” section.
Side USB Inputs.
2.
Side HDMI Input.
3.
Headphone jack is used for connecting an external headphone to the system. Connect to
4.
the HEADPHONE jack to listen to the TV from headphones (optional).
Side audio-video connection input is used for connecting video and audio signals
5.
of external devices. To make a video connection, y
ou must use the supplied AV
connection cable for enabling connection
. First, plug singular jack of the cable to
the TV’s Side AV socket. Afterwards, insert your video cable’s (not supplied) connector
into the
YELLOW
input (located on the plural side) of the supplied AV connection cable.
Colours of the connected jacks should match.
To enable audio connection, you must use
RED
and
WHITE
inputs of the side AV
connection cable. Afterwards, insert your device’s audio cable’s connectors into the RED
and WHITE jack of the supplied side AV connection cable. Colours of the connected
jacks should match.
Note:
You should use audio inputs of side AV connection cable (RED & WHITE)
to enable sound connection when connecting a device to your TV by using PC or
COMPONENT VIDEO input
.
Aerial Connection
IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.
After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the
•
mains. Plug the power cable to the mains socket outlet.
Aerial & Cable Connection
Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.
•
HDMI 3
Aerial or Cable
5Vdc
Max:500mA
5Vdc
Max:500mA
SIDE AV
HDMI
