VESTEL 17MB18, Service Manual

Page: 6 / 76

Figure1: WISP Main Menu
Figure2: I2C Configuration
5- Click “Erase Flash” button and then click “Send” button. If ereasing is done without any
problem, “three green OK” will be displayed on the main menu window. This indicates
that the memory inside the IC is erased succesfully.
6- Click “Write Flash” button and then click “Browse” button. Select the “gtv.hex” UOC code
file by browsing the explorer to the folder where this “gtv.hex” file is stored. Wait for a
few seconds untill the program reads the code. You will see the blue bar indicating the
“reading operation” on the bottom of the Wisp main menu window.
7- Click “Send” button. You will see the blue bar indicating the “Loading Code to UOC IC”
on the bottom of the window. When the loading operation is over without any error
“three green OK” will be displayed on the window. This indicates the loading operation is
performed succesfully.
Step3: Initializing the TV
8- Turn off and on the TV. Press RCs “Menu” (M) and “4””7””2””5” buttons respectively.
9- Press RCs “0” ”0” ”1” buttons respectively. (“Init TV 0” will be displayed on the screen)
10- Press RCs “” and set “Init TV 1” and wait the TV to automatically turn off.
2