Vestax PDX-a2S Owner'S Manual Download Page 10

8

9

1

When the indicator
lamp is lit showing
the operating
condition for the
p r e - d e t e r m i n e d
speed (33-1/3 or 45
rpm).

2

During the operation
of pre-determined
speed, pitch control
fader can not be
functioned. And once
press the quartz
control button, the
indicator lamp is put out, the speed can be adjusted by pitch control fader.

3

During the operation of above 2., if you want to change to speed
to the pre-determined one, press the quartz button. The indicator
lamp lights and speed will become pre-determined one even
when the pitch control fader not in the 

center.

4

Pitch control is possible up to a maximum of approximately 

±

10%.  Adjust the Pitch by sliding the Pitch Control Fader.

QUARTZ LOCKED CONTROL AND PITCH ADJUSTMENT

STYLUS ILLUMINATOR (Detachable Mini Light)

-100

-10

-50

-5

0

50

5

10

100

In case you wish to control the START/STOP with
using external equipment like a Foot-switch etc.,
input jack is provided at the left side of rear panel.

R E M O T E   C O N T R O L

1

Place the record on the turntable mat.

2

Press the power switch button provided at rear panel to turn
"ON" position.

3

Remove the stylus protector if cartridge is detachable one.

4

Push the start/stop button, then platter will start to turn.

5

Move the tone-arm position over the record. Put it down to the
record, and play will begin.

6

Set the turning speed to 33 1/3rpm or 45rpm by pushing the
speed select switch in obedience to the playing record RPM.

Fit the EP ADOPTOR in the center spindle, and start to play after
fitting EP RECORDS in EP ADOPTOR.

This unit features a small light for illuminating the stylus. It is
detachable and you can remove it when not in use.

7

Move the tone-arm to the armrest when play is finished.

8

Push the start/stop button, and platter will stop.

9

Turn off the power.

IN CASE OF PLAYING EP SIZE RECORD

A manual method of operation has been chosen
for the playing of records instead of using "Cue
Levers".The unit has been set to select 33-1/3
rpm automatically when the power button is
pressed to on.  Push the 45 rpm speed select
button if you play 45 rpm record.

N O T E

OPERATION

Summary of Contents for PDX-a2S













Reviews: