background image

11

e

ULTRA PITCH FADER

Using the ultra pitch fader will allow you to make dramatic
and accurate pitch adjustments up to +/-50%.

Currently set 

amount

Amount to 
be set

( Initial setting )

Every time the stick controller is pressed, the display changes as shown below.

Display

Advanced Pitch Control Features

The PDX-2300 features advanced digital pitch control features.
Through three different controls you are able to adjust the playing
pitch by up to +/-60%.

q

PITCH BEND & ULTRA SHIFT

Using the pitch bend joystick will allow you to quickly pull or
push the playing pitch of this unit. To pull means to slow
down, push means to speed up. Pushing the joystick towards
the tone arm will result in you being able to pull (minus) the
playing pitch.  Pushing the joystick in the opposite direction
will result in you being able to push (positive) the playing
pitch. It is possible to set the increment of pitch adjustment or
the pitch span to 1,2,3, & 6%.  The basic pitch span setting is
2%.  To change the pitch span setting press the joystick down.
Pushing the joystick down once will set the span to 3%, twice
6%, three times 1% and a fourth time will set it back to 2%.
You can also ultra shift the pitch by +/-50% by pushing the
joystick left or right. A movement to the left will speed up the
pitch momentarily whilst a push to the right will slow down
the pitch momentarily. This momentary ultra shift is always set
to +/-50%.  

w

FINE PITCH CONTROL

The PDX-2300 has two pitch control faders.  The larger,
100mm fader control is for fine pitch adjustment. With the fine
pitch fader you are able to make accurate adjustments up to +/-
10%.

When the power is turned on, pitch bend is set at
±2%.

NOTE

Summary of Contents for PDX-2300
















Reviews: