1. Power Connector
Connection terminal for supplied AC adaptor. DO NOT use the other AC adaptor, it may cause a
malfunction or accident.
2. Power Switch
Turns this unit’s power on and off.
Make sure the amplifier’s power off to prevent an unwanted burst of noise from the speakers.
3.
Input jack
RCApin jack, Line level
4. +10dB Gain Switch
When you connect a low output level equipment such as iPad, iPhone, iPod, iPod touch or the
other portable audio etc. to this unit’s input, turn this +10dB switch on. You don’t have to turn it
on when you connect normal output level equipment such as DJ mixer, CDJ, or audio interface
etc.
5. Output jack
RCA pin jack
6. Effect on / off switch
When effect is ON, the LED lights green. When effect is OFF, it lights red and the unit plays the
original sound. No lights when t
his unit’s power is off.
7. LOW volume
Volume to cut, boost and adjust the low frequency sound. Cut the low sound by turning this
volume to fully countorclockwise, Flat at 12 O’clock position, Boost up to +6dB by rotating
clockwise.
8. MID volume
Volume to cut, boost and adjust the mid frequency sound. Cut the mid sound by turning this
volume to fully countorclockwise, Flat at 12 O’clock position, Boost up to +6dB by rotating
clockwise.
9. HIGH volume
Volume to cut, boost and adjust the high frequency sound. Cut the high sound by turning this
volume to fully countorclockwise, Flat at 12 O’clock position, Boost up to +6dB by rotating
clockwise.
10. LOW-MID Crossover Resonance frequency point
Adjusts the crossover frequency point between LOW and MID. This frequency point would also
be the LOW-MID resonance frequency point.
11. MID-HIGH Crossover Resonance frequency point
Adjusts the crossover frequency point between MID and HIGH. This frequency point would also
be the MID-HIGH resonance frequency point.
12. LOW-MID Resonance volume
Adjusts the resonance level at the LOW-MID Crossover point.
13. MID-HIGH Resonance volume
Adjusts the resonance level at the MID-HIGH Crossover point
14. Output
Adjusts the output level.
15. LED meter
Displays the left/right output level.