Subject to modifications.
© Vestamatic GmbH
1/2
G
Art.-Nr.:
0000 006 GB 0918 A02 • Vestamatic GmbH • Dohrweg 27 • D-41066 Mönchengladbach
• www.vestamatic.com
IO-AIR Transceiver USB
IO-AIR Transceiver USB
IO-AIR
Installation and Operating Instructions
IO-AIR Transceiver USB
Art.-no.: 01580160
USB Radio Transceiver.
G
0000 011 GB 0918 A02
1. Safety precautions
ATTENTION!
– Check the USB-Transceiver for signs of mechanical damage
after unpacking. If you notice any shipping damage, do not
start up the USB-Transceiver and notify your sup plier imme-
diately.
– The USB-Transceiver should only be used for the purpose
specified by the manufac turer (refer to the operating instruc-
tions). Any changes or modifications thereof are not permis-
sible and will result in loss of all warranty claims.
Ä
These products comply with the essential requirements. These
products are conform to the basic requirements of the European
Radio Equipment Directive 2014/53EU. The Declaration of Con-
formity concerning these products are available on our website:
www.vestamatic.com.
4. Declaration of conformity
p
Article
IO-AIR Transceiver USB
Art.-no.:
01580160
Radio frequency:
868.3 MHz
Transmission power:
11 dBm
Power supply:
5 V / USB-Port
Operating temperature:
0 °C (32 °F) to +40 °C (104 °F)
Protection degree:
IP 20
Dimensions (L × W × D):
24 × 10.4 × 61.1 mm
Colour:
white
3. Technical data
2. Short description
USB radio transceiver to control IO-AIR radio receiver
Bidirectional protocol
5. Functional description
The USB transceiver is used to control IO-AIR radio receivers.
For further information, please refer to the operating instructions of the
respective radio receiver.
6. Installation
Connect the USB transceiver to a free USB port on your device. If neces-
sary, a comport setting must be made. Please refer to the description in
section 8.
LED status
7. Description of USB-Transceiver
The USB transceiver holds two LEDs, one green and one blue, which
allow easy feedback.
A. Blue LED:
If the blue LED lights up, it indicates that a command is being transmitted.
B. Green LED:
When the green LED lights up, the USB transceiver receives information
from the USB serial port.
