The control has a wide range of functions which can be set to meet your individual requirements. Press and hold the automatic button
U
and the manual
button
H
simultaneously for 3 seconds to go to the main menu.
– Press the automatic button
U
again to go to the next option on the main menu.
– Press the manual button
H
to go to a sub-menu option.
– Press the manual button
H
again to go to the next option on the sub-menu.
NOTE!
– Using this function will deactivate any previously set up (H1) and/or down (H2) times.
– If a particular up or down time is disabled (OFF), the corresponding Astro function will also be disabled.
i
7. Programming menu
9. Basic settings
10. Programming details
There are two ways of setting values in the individual menus: briefly press for step-by-step programming or press and hold for more than 2 seconds to
scroll through the available values using the
ö
and
ü
buttons. For each main menu item or sub-menu item you will receive a short message telling you
which menu item you are currently in. Main menu items are indicated by the letter H and the main menu number (e.g. H5). Sub-menu items are indicated
by the letter U, the main menu number and the sub-menu number (e.g. U5.1).
If no button is pressed for over 3 minutes in the programming menu, the programming menu will close automatically.
To activate automatic operation, please press the automatic operation button
U
. The roller shutter control indicates the change of operating mode by briefly
displaying A and by changing the display from
H
(manual operation) to AUTO (automatic operation). Automatic control is now activated and the roller shutter
will go up and down at the programmed times. It is also still possible to raise or lower the roller shutter outside the programmed times by pressing the
Up and Down buttons. This does not affect the programmed procedure.
Simply press the opposite button to stop the motion, i.e.:
press the down button
q
, if the roller shutter is moving up,
press the up button
Q
, if the roller shutter is moving down.
You will only be able to raise or lower the shutters by pressing the Up or Down button again.
You can switch operating modes at any time. To return to manual operation, press the manual button
H
. The control will revert to manual operation. This
will be indicated with the H symbol and AUTO will change to
H
on the display.
Automatic control is now deactivated and the roller shutter will no longer go up and down at the programmed times. However, it is still possible to raise or
lower the roller shutters by pressing the Up and Down buttons.
Display of automatic travel times
In automatic operation the travel times for the current day are displayed by pressing the up and down buttons briefly (< 1 second). If the random, Astro or
tilting functions are active, this will be indicated by the corresponding symbol (Z, A,
J
J
).
Once the device has been correctly installed and the power supply switched on, the current time will be displayed on the control display. By default the
control system operates in manual operation mode and all automatic functions are disabled.
9.1
Manual/automatic operation mode
9.2
Switching from manual to automatic operation
To go to the individual menus and sub-menus of the control, please proceed as follows:
Press the automatic button
U
and manual button
H
simultaneously for 3 seconds to open the menu structure.
In this menu you can programme the up time for each day of the week. This up time can be combined with the random time.
The up symbol
Q
flashes to show the up time. You can set the time between
0 0:0 0
and
2 3:5 9
using the up and down buttons (
Q
or
q
).
To deactivate this function, enter a time between
2 3:5 9
and
0 0:0 0
. The display will show
o f f
.
Press the menu button
U
once to go to the menu for setting the down time (H2).
H1
Setting the daily up time
In this menu you can programme the down time for each day of the week. This down time can be combined with the random time.
The down symbol
q
flashes to show the down time. You can set the time between
0 0:0 0
and
2 3:5 9
using the up and down buttons (
Q
or
q
).
To deactivate this function, enter a time between
2 3:5 9
and
0 0:0 0
. The display will show
o f f
.
Press the menu button
U
once to go to the menu to activate the week function (H3).
H2
Setting the daily down time
The random generator produces a “random time”. This means that shutters go up or down with a deviation of up to +/- 15 minutes from the programmed
times. This “irregular” raising and lowering of the shutter will give the impression that the house is occupied and offers extra security when you are absent
for long periods. To activate the random generator, please proceed as follows:
The Z symbol flashes to indicate random time. Use the up and down buttons (
Q
or
q
) to switch the random time on or off. The status will be shown by
“
0ßfßf
” or “
0ßn
” on the display.
Press the menu button
U
again to go to the menu for setting the astro function (H5).
H4
Setting the random function
The Astro function is an electronic calendar. Depending on the sunrise and sunset times, the up/down times will be automatically adjusted according to your
residence's geographical location (see Astro table). Nevertheless, these times will be checked against the programmed up/down times.
Press the sub-menu button
H
once to go to the sub-menu for setting the up time correction (U5.2).
Press the menu button
U
once to go to the menu for setting the sun function (H6).
Press the sub-menu button
H
once to go to the sub-menu for setting your place of residence (U5.1).
Press the menu button
U
once to go to the menu for setting the sun function (H6).
U 5.1 Sub-menu for setting the place of residence
For the Astro function to work correctly you must enter your place of residence as the sun rises and sets at different times in different areas of Europe.
You will find the code for your place of residence in the Astro table below.
H5
Setting the astro function
In this menu you can switch the week function on or off. If the week function is active, the current day of the week will be displayed.
The status will be shown by “
0ßfßf
” or “
0ßn
” on the display. You can switch the week function “
0ßn
” or “
0ßfßf
” using the up and down buttons (
Q
or
q
).
If the week function is active, press the sub-menu button
H
once to go to the sub-menu for setting the daily up and down times.
Press the menu button
U
again to go to the menu for setting the random function (H4).
Sub-menu for setting up and down times for each day of the week
H3
Activating the week function
NOTE!
This function is not available in manual operation.
i
In this menu you can programme the up and down times for each day of the week.
The up symbol
Q
and the day of the week will flash on the display. You can set the up time between
0 0:0 0
and
2 3:5 9
using the up and down buttons
(
Q
or
q
).
To deactivate this function, enter a time between
2 3:5 9
and
0 0:0 0
. The display will show
o f f
.
To change the down time, please press the sub-menu button
H
once. The down symbol
q
and the day of the week will flash on the display. You can set
the down time between
0 0:0 0
and
2 3:5 9
using the up and down buttons (
Q
or
q
).
To deactivate this function, enter a time between
2 3:5 9
and
0 0:0 0
. The display will show
o f f
.
To change to a particular day of the week, keep pressing the sub-menu button
H
until the appropriate day is displayed. Once all the days of the week have
been viewed, the sub-menu goes back to Monday.
Press the menu button
U
once to go to the menu for setting the random function (H4).
Artikel-Nr.: 84100702 B1
MAIN MENU
SUB-MENU
Display
Press and hold buttons
Auto
U
and Hand
H
for 3 seconds
daily up time
Button
U
daily down time
Button
U
Sun function
ü
OFF / ON
ö
ü
OFF / ON
ö
Button
U
Button
H
Astro function
ü
OFF / ON
ö
ü
OFF / ON
ö
Button
U
Button
H
Motor run time
Button
U
Button
H
Week function
ü
OFF / ON
ö
ü
OFF / ON
ö
Button
U
Button
H
Random function
ü
OFF / ON
ö
ü
OFF / ON
ö
Button
U
Button
H
Button
H
etc.
Up time Monday*
Down time Monday*
Button
H
Down time Sunday*
Button
H
Up time Sunday*
Button
H
Manual summer/winter time
changeover
Button
H
Button
H
Button
H
Sun sensitivity*
Button
H
Tilt time
Time / Date
Button
U
Button
H
Menu END
Button
H
Button
H
Year
Inching mode
* Does not appear if “OFF” is shown in main menu displays H3, H5 and H6.
Date
Autom. summer/winter time changeover
ON
OFF
Button
H
Button
H
Button
H
Zone Code*
Up correction*
Down correction*
H1
Details
Details
H2
H3
U5.1
U5.2
U5.3
U6.1
U7.1
U7.2
U8.1
U8.2
U8.3
U8.4
H4
H5
H6
H7
H8
8. Manufacturer’s default settings
Time and date are factory preset. The following settings are also preset but may be adapted to your own personal requirements as necessary.
NOTE!
If the daily up time is disabled (OFF), the corresponding Astro function (up) will also be disabled.
i
NOTE!
If the daily down time is disabled (OFF), the corresponding Astro function (down) will also be disabled.
i
H1
Setting automatic up time:
daily
0 7:0ß0
hrs
H2
Setting automatic down time:
daily
2 0:0ß0
hrs
H3
Setting the week function:
0ßfßf
H4
Setting the random time:
0ßfßf
H5
Setting the astro function:
0ßfßf
H6
Setting the sun function:
0ßfßf
H7
Setting the motor run time:
120 seconds
H7
Setting the tilting time:
0.0 seconds
H8
Setting the summer/winter time changeover:
automatic
H7
Setting the inching mode:
0ßfßf
Programmed up time
before
the morning Astro time
roller shutter moves up at Astro time
Programmed up time
after
the morning Astro time
roller shutter moves up at programmed Up time
Programmed down time
after
the evening Astro time
roller shutter moves down at Astro time
Programmed down time
before
the evening Astro time
roller shutter moves down at programmed Down time
thus always at
the later time
thus always at
the earlier time
Code
1
2
3
4
Code
5
6
7
8
Code
9
10
11
12
Code
13
14
15
16
Location of residence
Schleswig-Holstein, northern Lower Saxony
Mecklenburg-Western Pomerania
North Rhine-Westphalia,
southern Lower Saxony
Brandenburg, Saxony-Anhalt
Location of residence
Rhineland-Palatinate, Saarland, Hesse
Saxony, Thuringia
Baden-Wuerttemberg
Bavaria
Location of reseidence
Scandinavia
Great Britain
Northern France, Belgium,
The Netherlands, Luxembourg
Germany
Location of residence
Southern France
Switzerland, Austria, northern Italy
Spain
Southern Italy, Sicily, Corsica, Sardinia
