2013.A
3
4. Precautions & Recommendations
4.1 Operation notice:
1. The equipment shall be installed and maintained by professional technicians. If
necessary, please contact professional technicians. The grounding connection of the
equipment must comply with local regulations. (warning: improper operation, installation
or maintenance may cause property damage, casualties, etc. Please read this manual
carefully before operation, installation and maintenance.)
2. All operators must strictly abide by the electricity safety rules, and confirm that the
power supply voltage is consistent with the power supply voltage on the product
nameplate and has been safely grounded before use.
3. All operations can only be carried out on the safe condition. In case of failure, the
machine must be repaired immediately.
4. This product needs to be operated by a trained chef and cannot be disassembled or
modified. The disassembly and refitting of products will lead to serious accidents.
5. Before cleaning, unplug the plug, cut off the power supply, and do not use jet for
cleaning. Water can conduct electricity, and the product may cause electric shock due to
leakage.
6. Do not knock the product or place heavy objects on it. Abnormal operation may cause
damage and danger. Before, after, and in the working process, because the temperature
is high, do not touch the appliance directly with hands, especially the high- temperature
area, which may cause burns.
7. It is forbidden to use the power supply other than those indicated for the product.
8. It is forbidden to use the power switch that does not meet the safety standards.
9. When the thunder approaches, the power switch shall be disconnected as soon as
possible. It can avoid electrical damage caused by lightning.
10. It is forbidden to use hard and sharp objects which may damage the surface of griddle
11. Turn off the switch after the work
12. Circuit installation and maintenance must be carried out by qualified professional
engineers.
13. If the power cord is damaged, to avoid danger, it must be replaced by the
manufacturer or its maintenance department or similar full-time personnel.
14. It is forbidden to wash the electrical box directly with water or immerse it in water for
cleaning.
