9
BEFORE FIRST USE…
Filling the Vacuum Pump
Filling the oil pump is required
before the first use
, when the oil
level is below the minimum oil level, or if performance is seriously
reduced. The oil needs to be replaced after 25 hours of the first
use and then after every 60 hours of use.
Use only SAE 10/ISO 32 or SAE 20/ISO 68 grade vacuum pump
oil.
Steps for filling:
1.
Remove the oil pump fill window with a screwdriver to
expose the oil pump fill cap.
2.
Unscrew the cap on the oil filling port of the oil pump with
the wrench provided.
3.
Using a small bottle, squeeze oil into the pump to a level.
between 1/2 to 3/4 of the oil inspection window.
4.
Tighten the nut on the oil filling port after filling.
5.
Replace the oil pump fill window to complete the process.