Vessel GT-S600C, Instruction Manual

Page: 4 / 40

For Safe Use
3
they may be caught in them.
● Keep a good posture while working.
Keep a good posture and hold the tool firmly in case of an
unexpected situation.
●
Avoid accidental start-up.
Make sure the trigger is released before connecting the air
hose to the unit. Be careful not to press the trigger when
carrying the air tool.
● Hang the tool securely.
If the tool is suspended by a balancer, etc. check whether
the equipment is securely installed. Conduct a regular
maintenance on the suspending equipment as well.
●
Keep the tool away from electricity.
The air tool is not insulated against electricity.
●
Stop using the tool if you notice any abnormalities.
If you notice any abnormalities, stop using the tool
immediately and contact us or your local distributor for
maintenance, inspection, and repair.
Warning ■ Miscellaneous
●
Use the tool only for its intended applications.
It may lead to an unexpected accident if the tool is used for
purposes other than those specified in the manual.
●
Do not attempt any modification.
Do not modify the unit. Any modification will void the
warranty and may cause a hazardous situation.
●
Do not remove any parts.
Also, do not use the tool if any of its parts or screws has
been removed or missing. It may result in a hazardous
situation.
●
Shut off the air supply and detach the air hose from
the tool;
・
when the tool is not in use
・ when the tool is kept in storage
・
when maintenance is performed
・
when the tool tip (bits / sockets) is replaced
・
when there is any sign of danger or malfunction