18
Cleaning procedure
1) Turn the power switch to the OFF position to stop the
operation.
2) Slide the brush installed on the unit to both ends to clean
the needle electrode.
* Remove dust adhering of cleaning brush.
3. REPAIRING OR REPLACING THE
NEEDLE ELECTRODE
If the cle
aning brush becomes extremely dirty or the needle
electrode is damaged, broken or bent, the components
must be replaced. For repair and replacement of the parts,
contact the dealer where the product was pur
chased.
CAUTION
CLEANING
If the needle electrode or Ion air outlet is dirty, it could lower the static erasing
performance or cause dust to fly around. Be sure to clean the contaminated parts
according to your service condition.
WARNING
PROHIBITED
If HV ask us to have it replace the needle electrode unit is broken or dropped out,
stop the operation and replace it with a new one. It can lead to an electric shock
or injury.
4. Filter cleaning/replacement
Contamination degree of the filter depends on installation place and usage conditions.
erasing function or airflow decreases, clean the filter first. During the filter cleaning, stop the
operation, pull out the AC adapter plug from the receptacle or the AC adapter connecter from the
body. Spread a cloth or the like on the table to protect the body or the devices from the damage.
Cleaning procedure
①
Remove the filter cover.
②
Remove the filter.
③
Rinse the filter with running water.
④
After the rinse, drain excess water and dry the
filter thoroughly before the installation.
*If filter contamination cannot be removed or damage
is serious, replace the filter (Use the optional filter
CF-600F).
Accessories
Rough filter
：
CF-300F
Cleaning brush
：
CF-300B
■
Maintenance
is dirty, it could lower the static erasing
to clean the contaminated parts
is broken or dropped out,
can lead to an electric shock
Contamination degree of the filter depends on installation place and usage conditions. If static
aning, stop the
operation, pull out the AC adapter plug from the receptacle or the AC adapter connecter from the
Spread a cloth or the like on the table to protect the body or the devices from the damage.
