Vess R2000 SERIES, Product Manual

Page: 549 / 705

522
Vess R2000 Series Product Manual Promise Technologies
S
huttIng
D
own the
S
uBSySteM
(clu)
There are two methods for shutting down the subsystem. Choose one of the following procedures:
• “Shutting down the enclosure – Telnet Connection” on page 522
• “Shutting down the enclosure– Serial Connection” on page 524
s
huttiNg dowN the eNClosure
– t
elNet
C
oNNeCtioN
This function shuts down the Vess R2000 subsystem on a Telnet connection. Additional action is required, as
described below.
Important
If you have a JBOD Expansion, always power off the RAID subsystem first.
Then power off the JBOD subsystems.
To shutdown the RAID subsystem:
1. From the Main Menu, highlight Additional Info and Management and press Enter .
2. Highlight Shutdown or Restart and press Enter .
3. Highlight Option and press the spacebar to display Shutdown .
4. Highlight Submit and press Enter .
A warning message appears.
5. Press Y to continue.
The screen goes blank.
6. Wait for no less than two minutes.
7. The subsystem will then turn off the system power one after another.