• With vmAIS you can connect
to the WatchMate using either
the USB COM port or over WiFi
by entering the IP address
(192.168.15.1 default).
• Click the
Connect
button and
enter your vessel details.
• When all the information
is correct, click on the S
ave Data
button.
• You can also change your WiFi
settings, view your GPS signal
strength, transponder status and
VSWR level using vmAIS.
REGISTER YOUR WATCHMATE
Vesper Marine releases downloadable updates from time to time. These updates
often add new features. To be notified when a new update is available please
register your WatchMate at
www.vespermarine.com/register
.
GOT A QUESTION?
Visit
www.vespermarine.com/vision
for comprehensive answers to frequently
asked questions, the user manual, technical support, downloads, local dealer
contacts and more...
YOU’RE FINISHED!
If you have a GPS position and there is no warning symbol the WatchMate
is transmitting your position and is successfully installed! Your position will
be transmitted every 3 minutes when your speed is under 2 knots or every
30 seconds otherwise. Your vessel information (e.g. name, callsign, etc) is
transmitted every 6 minutes. If the warning symbol is still visible, touch it to
display the reason. See the troubleshooting section for the probable cause.
