manualshive.com logo in svg

VESPA PRIMAVERA 50 2T 2013, Manual

Share
Download
VESPA PRIMAVERA 50 2T 2013 Manual Download Page 63

Filters, jets or carburettor body
dirty or clogged.

Contact an 

Authorised Service

Centre.

Insufficient battery charge

Kick-start. Recharge the battery.

I

GNITION

 

PROBLEMS

No spark from spark plug. Due to
the presence of high voltage, this
check should only be carried out by
an expert.

Make sure the electrodes are
properly adjusted. Check that they
are (clean with pure petrol and a
metal brush or with emery cloth).
Check the spark plug insulator:
Replace the spark plug if the
insulator is cracked or broken. If
the spark plug is in good
conditions, contact an 

Authorised

Service Centre.

L

ACK

 

OF

 

COMPRESSION

Spark plug loose. Loose cylinder
head, worn piston retaining rings.

Contact an 

Authorised Service

Centre.

HIGH CONSUMPTION AND LOW PERFORMANCE

Air filter blocked or dirty.

Contact an 

Authorised Service

Centre.

63

3 Maintenance

Summary of Contents for PRIMAVERA 50 2T 2013



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands