manualshive.com logo in svg

VESPA LX 125 150 Euro 3, User Manual

Share
Download
VESPA LX 125 150 Euro 3 User Manual Download Page 48

WARNING

IDLE SPEED MUST BE ADJUSTED WHEN THE ENGINE IS VERY HOT. BEFORE
THIS OPERATION, MAKE SURE THAT THE THROTTLE GRIP HAS THE RECOM-
MENDED BACKLASH. IF BACKLASH IN THE THROTTLE CONTROL TRANS-
MISSION NEEDS ADJUSTING TAKE YOUR SCOOTER TO A PIAGGIO DEALER
OR AUTHORISED SERVICE CENTRE

Characteristic

Engine idle speed

1,650±100 rpm

03_31

Front disc brake (03_31)

The brake disc and pad wear is automatically compensated, therefore it has no effect
on the functioning of the front and rear brakes. For this reason it is not necessary to
adjust the brakes. An excessively elastic brake lever stroke may indicate the presence
of air in the braking circuit or an irregular brake operation. In this case, particularly
considering the importance of the brakes in terms of safety, it is strongly recommended
that you take the vehicle to an 

Authorised Service Centre

 as soon as possible for

the appropriate checks.

WARNING

CHECK BRAKE PADS FOR WEAR ON A REGULAR BASIS (AS INDICATED IN
THE SCHEDULE MAINTENANCE TABLES). IF THE THICKNESS OF ONE OR
BOTH PADS IS IN THE REGION OF 1.5 MM, BOTH PADS MUST BE CHANGED.
IT IS RECOMMENDED TO CARRY OUT THIS OPERATION AT AN AUTHORISED
SERVICE CENTRE AS SOON AS POSSIBLE.

48

3 Maintenance

Summary of Contents for LX 125 150 Euro 3











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands