VESPA GTV 250 i.e. Owner'S Manual Download Page 47

Page: 47 / 80

WARNING

DO NOT DISCONNECT THE BATTERY CABLES WITH THE ENGINE RUNNING,
THIS CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE ELECTRONIC CON-
TROL UNIT.

WARNING

SPENT BATTERIES ARE HARMFUL FOR THE ENVIRONMENT. COLLECTION
AND DISPOSAL SHOULD BE CARRIED OUT IN COMPLIANCE WITH CURRENT
REGULATIONS.

03_20

Fuses (03_20, 03_21, 03_22)

The electrical system is equipped with:

1. six protection fuses «

» located in the glove compartment to the left

2. two fuses «

» located under the helmet compartment under the saddle hinge latch.

3. two fuses «

» located under the helmet compartment on the side fairing.

The chart shows the position and characteristics of the fuses in the vehicle.

CAUTION

BEFORE REPLACING THE BLOWN FUSE, FIND AND SOLVE THE FAILURE
THAT CAUSED IT TO BLOW. NEVER TRY TO REPLACE THE FUSE WITH ANY
OTHER MATERIAL (E.G., A PIECE OF ELECTRIC WIRE).

3 Maintenance

Summary of Contents for GTV 250 i.e.

















































































Search results

Summary of Contents for GTV 250 i.e.

Reviews:

Related manuals for GTV 250 i.e.

Brands by name

Popular brands

VESPA GTV 250 i.e., Owner'S Manual

Search results

Summary of Contents for GTV 250 i.e.

Reviews:

Related manuals for GTV 250 i.e.

Brands by name

Popular brands