Removal
- Remove the rear brake calliper.
- Remove the brake disc and the hub from the
wheel axle
- To remove the brake disc from the hub, hold the
unit firmly with a vice and operate on the 5 fixing
screws indicated in the photograph
Refitting
- To reassemble the brake disc on the hub, carry out the removal operations in the reverse order ar-
ranging the brake disc on the hub on the side opposite the wheel keying
- Follow the direction of rotation shown by the arrow and tighten to the prescribed torque.
- Fit the hub unit
- disc in the wheel axle
Locking torques (N*m)
Disk to the hub
11 ÷ 13 Nm
Disc Inspection
- Remove the rear brake calliper.
- Check the disc thickness with a micrometer
Characteristic
Minimum thickness allowed after use:
3.5 mm
Standard thickness:
4 +0.2-0.2 mm
- Repeat the measurement at no fewer than six points on the disc.
- Check the regular nature of the rotation of the brake disc assembly using the appropriate tool fixed
onto the brake calliper as shown in the photo.
- In order to be able to anchor the appropriate tool properly use a metal plate with M8 threaded hole
and fix it to one of the two rear brake calliper attachment points.
- Suitably fix the flange to the wheel axle with the original nut and spacer and a Æ 17 mm bearing.
N.B.
SO AS NOT TO FALSIFY THE READING, YOU SHOULD ROTATE THE DRIVEN PULLEY AXLE IN
ORDER TO ROTATE THE DISC.
Specific tooling
020335Y
Magnetic support for dial gauge
Vespa GTS 250 I.E.
Braking system
BRAK SYS - 7
Summary of Contents for GTS 250 I.E.
