background image

Limited Warranty

Vescent Photonics warrants this product to be free from defects in materials and workmanship for a period of one year 
from the date of shipment. If this product proves defective during the applicable warranty period, Vescent Photonics, at 
its option, either will repair the defective product without charge or will provide a replacement in exchange for the 
defective product. The customer must notify Vescent of the defective product within the warranty period and prior to 
product return. The customer will be responsible for packaging and shipping the defective product back to Vescent 
Photonics, with shipping charges prepaid.

Vescent Photonics shall not be obligated to furnish service under this warranty from damage caused by service or repair 
attempts made without authorization by Vescent Photonics; from damage caused by operation of equipment outside of 
its specified range as stated in either the product specification or operators manual; from damage due to improper 
connection to other equipment or power supplies. 

This warranty is in lieu of all other warranties including any implied warranty concerning the suitability or fitness of 
the product for a particular use.  Vescent Photonics shall only be liable for cost of repairs or replacement of the 
defective product within the warranty period.  Vescent Photonics shall not be liable for any damages to persons or 
property resulting from the use of the product or caused by the defect or failure of this product.  Vescent Photonics' 
liability is expressly limited to the warranty set out above. By accepting delivery of this product, the purchaser 
expressly agrees to the terms of this limited warranty.

Vescent Photonics

Printed Jun 10, 2008

Summary of Contents for D2 Series










Reviews: