15 (20)
User Manual Vesala Transmitter PKT2 X2.0 ENG
of the supplied adhesive putty or affect the amount of adhesive putty required to reliably attach
the device to a surface. If possible, restrict access to the hazard zone under the device when the
device is attached to an elevated position. Always secure the device with additional supports if
the device is attached to an elevated position, and it is possible that persons or animals may
enter the hazard zone under the device. When the device cannot be reliably secured and the
hazard zone under the device cannot be completely restricted, it is required that anyone
entering the hazard zone under the device wears adequate personal protection equipment.
Always remove the device before drilling.
The supplied adhesive putty may be used to attach the Transmitter PKT2 to a dry, clean and
solid surface. The putty has working temperature range of +15…+30 °C Use other attachment
methods outside this temperature range or when the surface is wet or dirty.
When using other attaching methods, do not hang Transmitter PKT2 directly from a nail or a
screw. Metal objects inside on near the centre hole degrade locating accuracy. Instead, attach
Transmitter PKT2 to a piece of string and hang the string from a nail or a screw.
Place the device against the structure with the user interface towards the user. Place the centre
hole of the transmitter on the reference point to be transferred.
Do not leave the transmitter attached for extended times because the attachment may fail.
Before drilling, remove the transmitter from the structure to avoid damage or falling.
