TPM-173W Driver Install:
1. Be sure that USB cable is connected from the computer.
2. Power on the computer.
3. Load the touch screen driver CD.
4. Follow the step-by-step instructions as shown on pop-up windows.
Please Note: The TPM-173C with Capacitive Touch Screen is Microsoft
®
Windows
®
HID (Human Interface Device) compatible if you use the USB touch screen
interface. No additional software driver is required for general operation of the touch
screen.
A special calibration tool can be installed for touch position accuracy improvement.
See "Optional Capacitive Calibration Tool Install" section for more information.
TPM-173C Optional Capacitive Calibration Tool Install:
If you would like to use the Optional Capacitive Calibration Tool, follow the
instructions below:
1. Load the driver CD to your CD-Rom driver.
2. Open the “CalTouch” folder.
3. Click “CalTouch.exe” to execute calibration process
4. The HID Touch Digitizer calibration tool will automatically open. From here the
user can choose the operations following:
a. 4 Points Calibration
b. 9 Points Linearization
c. 25 Points Linearization
d.
Clear
e.
Draw
Test
f. Advanced. In the Advanced settings area the user may do the adjustment/
operation following:
i. Adjust the Double Click Area
ii. Enable auto right click and adjust the auto right click time
iii. Choose to be either in the HID Mouse Mode or HID Digitizer Mode
iv. Simply click the “Apply” button once the settings are
fi
nalized.
19
