OVERVIEW
The XT+ Releasing Control Unit is a microprocessor-controlled releasing control unit that will communicate with
a master fire alarm control panel via a two-wire serial bus. Each unit may contain one or two independent
XT+ modules, as shown. Up to 15 modules can be connected to an Elite RS panel, model number VF0810-xx or
VF0820-xx, firmware V07.02.005A (for Apollo) or greater or V07.02.005H (for Hochiki) or greater.
As shown in the image, the entire cabinet and everything contained within is referred to as a "unit". The individual
releasing modules and power supply are referred to as "modules".
Fascia
This section describes the features of the XT+ that are located on the fascia.
Overview
VES Fire Detection Systems
XT+ Releasing Control Unit Installation Manual
Version 1.00 | December 2018 | MAN-1252VES
Page 11