EN
G
LIS
H
3
Handle
Spout
Lid open button
Body
0/I switch
Plastic
neck
Base
Lid
and pour out before normal use (repeat three times). Then boil the
water, turn the switch to O position, unplug the appliance from mains
and leave the appliance with the lid open for 12 hours and pour out.
Wipe the housing of the appliance with wet soft cloth. The appli-
ance is ready for use.
PRODUCT DESCRIPTION
An automatic safety cut-out has been fitted for protection against
overheating. It will operate if the appliance is switched on when
containing insufficient water amount. Always ensure the water
inside the appliance covers the
minimum mark on the water level indicator gauge. If the auto-
matic safety cut-out has operated, switch the appliance off, dis-
connect from the power outlet and allow the appliance to cool
down for 5 minutes. Refill with water and switch on again. The
appliance will work as normal.
MAINTENANCE
1. Fill the appliance with water to desired level. Do not overfill or
there will be a risk of spillage or spitting. The water level indicator
will assist you to measure the correct amount. Fill the appliance via
opening the lid. Do not forget to close the lid after filling.
See the water level marking picture.
Do not fill with less than 0.2 L min capacity indication, to prevent the
Summary of Contents for VES1025
Page 1: ......
Page 17: ...РУССКИЙ 16 ...
