27
so as to use only the power required to reach the network. In
general, the closer you are to a wireless base station antenna, the
lower the power output. Before a phone model is available for sale
to the public, it must be tested and certified to the FCC that it does
not exceed the limit established by the government adopted
requirement for safe exposure. The tests are performed in positions
and locations (e.g., at the ear and worn on the body) as required by
the FCC for each model. The highest SAR value for this model phone
when tested for use at the ear is 1.153W/Kg and when worn on the
body, as described in this user guide, is 1.334W/Kg(Body-worn
measurements differ among phone models, depending upon
available accessories and FCC requirements). The maximum scaled
SAR in hotspot mode is 1.334W/Kg. While there may be differences
between the SAR levels of various phones and at various positions,
they all meet the government requirement for safe exposure. The
FCC has granted an Equipment Authorization for this model phone
with all reported SAR levels evaluated as in compliance with the FCC
RF exposure guidelines. SAR information on this model phone is on
file with the FCC and can be found under the Display Grant section
of http://www.fcc.gov/ oet/fccid after searching on
FCC ID: WA6S4006 Additional information on Specific Absorption
Rates (SAR) can be found on the Cellular Telecommunications
Industry Asso-ciation (CTIA) web-site at http://www.wow-com.com.
* In the United States and Canada, the SAR limit for mobile phones
used by the public is 1.6 watts/kg (W/kg) averaged over one gram of
tissue. The standard incorporates a sub-stantial margin of safety to
give additional protection for the public and to account for any
variations in measurements.
Body-worn Operation
This device was tested for typical body-worn operations. To comply
with RF exposure requirements, a minimum separation distance of
Summary of Contents for s4006
Page 1: ...s4006 User Manual...
Page 5: ...4 Back View...
