5
battery into corresponding slot of the mobile phone, and then press
the battery down to install the battery in place. The battery must be
ensured to be installed before powering on.
Finally install the rear cover and fix the bolts of the mobile phone.
1.1.2
Charging the battery
When the power of the battery was lower than normal, the phone
will prompt battery low. Please charge for the battery, otherwise you
will lose the files which not saved. If you don’t charge for a long time,
the phone will be powered off automatically.
When charging, the battery icon at the right upper corner of the
screen will appear in a dynamic rolling manner. During the charging
period, the battery, mobile phone and charger will become hot,
which is a normal phenomenon.
Warning:
The stated charging temperature ranges from 0
to 40
.
℃
℃
Please do not use charging equipment if the temperature
exceeds the range. Please do use the charger provided by the
supplier. Application of unauthorized charger may trigger
danger and breach the mobile phone maintenance warranty.
1.1.3
Use of battery
In actual use, the standby time and talk time of the mobile phone
varies with the network status, working environment and different
using manners.
1.2 Side sliding keypad
Your mobile is assembled with a side sliding keypad. In order to
open side keypad, you could slide the touch screen forward. When
the side sliding keypad is open, the screen will enter into horizontal
from vertical.
Fn
key: The key is used for inputting the special character
impressed on the right upper side of one key. Short press the key
once, and press the key with special character impressed on the
right upper side, the special character will be typed in once. For
