2. Activating the device
3. Screen Operation
①
Please pull out the band from the strap gently. To do this, you
can pull down on the strap where it says ‘OPEN’ just below the
device on the inside of the band.
②
Connect the device to a USB charging port (5V/500mAh) and
charge before initial use. Once connected, the current battery level
will be displayed on the screen for a short time. To view the current
battery level again, just gently tap the screen once.
-02-
Touch key
EN
Sliding up or down on
the screen switches
between modes and
wakes the screen up.
Single tapping the
touch key returns the
device to the main
interface or goes back
to the previous screen.
Single tap the screen to
check data.
